The Newnex FireNEX800™-SX optical repeater is the world's first 1394b optical repeater! Utilizing an IEEE1394 PHY and optical transceiver, the FireNEX800™-SX is capable of sending IEEE1394 signals across a single mode optical fiber cable. The FireNEX800™-SX is contained within a small box slightly larger than a deck of cards, which makes it unobtrusive and compact, allowing you to place it on a desktop already crowded with other things.
The Newnex FireNEX800™-SX can also be used as a standard IEEE1394b repeater, extending your signal an additional 4.5 meters. The real power, however, is in its optical connection. Setting up the FireNEX800™-SX is quite simple. Using a LC optical connector, plugging in the optical connection is without confusion or difficulty. It takes only minutes to setup, and there is no configuration necessary, like all IEEE1394 compliant hardware. The FireNEX800™-SX will work with 1394b at speeds of 800, 400, 200 and 100 Mbps, and with 1394a at speeds of 400, 200 and 100 Mbps. For optical cables, click on Optical Cables.
A FireNEX800™-SX SET is two FireNEX800™-SX optical repeaters, and one 120VAC/12VDC DC power adapters and a manual. Whenever you purchase 2 FireNEX800™-SX™ repeaters we consider it a set. Optical cable and FireWire cables not included. The Newnex FireNEX800™-SX comes with one-year manufacturer warranty.
Note: The power adapter provided by Newnex is UL certified. For countries that need certifications for power other than UL, please purchase the similar power adapter with the special power certification from the local stores.
FireNEX800™, FireNEX-MX™, FireNEX800™-SX, FireNEX-CAT5™, FireNEX-CAT5™ S400, FireNEX-COAX™, FireNEX-POF™ are registered trademarks of Newnex Technology Corp. All rights reserved.
|
