Ordering Information
PN
DP Alt Mode
Configuration
FIRENEX-UDC-2M
2-Lane DisplayPort + USB 3.2
C/M to C/F, 2m
FIRENEX-UDC-4M
2-Lane DisplayPort + USB 3.2
C/M to C/F, 4m
FIRENEX-UDCD2M
4-Lane DisplayPort + USB 2.0
C/M to C/F, 2m
FIRENEX-UDCD4M
4-Lane DisplayPort + USB 2.0
C/M to C/F, 4m
Key Features
- Active boost USB 3.2 Gen 2 signal up to 10Gbps data rate
- Backward compatible with USB 3.0/2.0
- Support 4K@60Hz display over DP Alt Mode
- Bidirectional USB PD 3.1 pass through up to 240W at 48V/5A
- USB Bus Powered, no additional power input required
- D-series type panel mount Ready
- Metal enclosure body for maximum durability and EMI protection
- Plug and Play for Windows, Mac and Linux OS
Specifications
USB*
USB 3.2 Gen 2
(aka USB 3.2 Gen 2x1, USB 3.1 Gen 2)
10 Gbps
USB 3.2 Gen 1
(aka USB 3.1 Gen 1, USB 3.0)
5 Gbps
USB 2.0/1.1
Fully Compatible
* USB 3.2 supported only with 2-lane DP mode
Both modes support USB 2.0/1.1
DISPLAY
2 Lane – DP v1.4
(HBR3 Source & Device)
Up to one 4K@60Hz, or two 2K@60Hz
4 Lane – DP v1.4
(HBR3 Source & Device)
Up to one 8K@60Hz, or two 4K@60Hz
MECHANICAL
Panel Mount Style
Neutrik D-Series
Upstream Port - Host
USB-C Female (with screw-locking)
Downstream Port - Device
USB-C Female (with screw-locking)
ENVRIONMENTAL
Operating Temperature
0°C to 40°C (32°F to 104°F)
Operating Humidity
10% to 90% relative humidity, non-condensing
Power Delivery
COMPLIANCE
Environmental
RoHS, REACH
SUPPORT
Warranty
1-year Manufacture Warranty
FAQ
Q: What’s the maximum cable length to use with FireNEX™-UDC?
A: FireNEX™-UDC is tested to work with passive USB-C cable up to 5 meter. Active USB-C cable is tested to work with FireNEX-UDC up to 15 meter.
Q: Does FireNEX™-UDC require power?
A: FireNEX™-UDC is bus-powered and requires no additional power supply. It consumes less than 1.5W at full load.
Q: Does FireNEX™-UDC contain any USB hub?
A: FireNEX™-UDC boosts the signal without using any USB hub chip, it will not add additonal hub tier to the connection.
Q: Is FireNEX™-UDC backward compatible with USB 2.0 or USB 3.0 peripherals?
A: Yes, FireNEX™-UDC is backward compatible with USB 2.0 and USB 3.0 peripherals, ensuring signal integrity at extended lengths.
Q: Are the USB-C ports of FireNEX™-UDC flippable?
A: The cable plugged into FireNEX™-UDC can be flipped.
Q: Can I connect FireNEX™-UDC to an Active Optical Cable (AOC) or Active Extension Cable to reach a longer distance?
A: Yes, FireNEX™-UDC can be used with active USB-C cables.
Q:Can I daisy chain FireNEX™-UDC?
A: Yes, users can daisy chain multiple FireNEX™-UDC together to reach longer range.
Installation Setup
